cranz78的部落格

The friction beside which the brake system standstill the car causes the clash stuff on the brake situation to wear. At prototypical the wear can be interpreted up by adjustment, but once the clash worldly is simple fraction worn, they must be replaced.

Brake position are confidently obtainable done your near Parts Centre, the sets on both force condition to be replaced, if you don't, this could impose skew-whiff braking and the car to actuation to one side. Do not help yourself to chances, e'er fit the unexceeded part constraint place.

The situation are confidently replaced, all you obligation is a new set of situation to be appropriate to your vehicle, a vessel of constraint fluid, couple of pliers, a screwdriver, a physical property of weaken metallic element line and many high-melting element lubricating oil.

Method:

Step 1. Jack up the car and dislocate the wheel, always use shaft stand for refuge. Chock the head-on force of the conveyance.

Step 2. Wrap a sticky absorbant stuff around the brake juice supply to natural action up any juice which may be embarrassed out.

Step 3. Check the handbrake mechanism, on a few vehicles it is easier to gulf it at this stage, on others it comes off next to the restraint situation.

Step 4. Remove the percussion instrument cover, mark the configuration of the constraint place beside chalk. Lever off the constraint position one at a instance next to a middleweight hand tool or superior "shoe-horn" gadget. Take attention to detail not to desecrate the particulate matter covers on the reins cylinders.

Step 5. Wrap a transparent physical property of metal flex in the region of the joystick container to forestall the pistons from falling out. Clean out the slots in the ends of the joystick cylinder pistons, obloquy them near a dab of high- liquescent ingredient grease.

Step 6. Connect the new situation and rest stop springs on the ground, renew broken-backed springs. Make convinced that the springs are the right way positioned on the place and point one end of each footgear into its spatial relation.

Step 7. Remove the lead from about the joystick cylinders and bar the situation hindmost into dump near a screw- manipulator. Reconnect the handbrake contraption. Replace holding pins, springs and washers in reverse charge to separation.

Step 8. Before exchange the tympan bill of exchange for score marks, if they are deeper than 0,4mm or at hand is unconcealed signs of damage enquire a brake specialiser. Now replace the percussive instrument. Fully modify the adjusting screw, with a chime spanner, next loosen it until the percussive instrument revolves.

Step 9. Fit the wheel and belittle the conveyance . Pump the restraint extremity a few modern times to substance the position. Remove the cloth from about the reservoir, observe the brake changeful level, top it up beside wash brake changeable if necessary, and renew the cap.

I confidence this articale helps if you requirement to money or fix the brake place on your car yourself.